AutomaticEye System

The intelligent camera system enables quick and exact cutting of printed patterns. For that purpose the system first identifies the reference marks through the camera, which is integrated in the MultiHead or available as a stand-alone tool. Compensation values are calculatetd fully automatically for material not right angled to the table top, print distortion or material changes and so guarantees an exact cutting of the contour.

Product information sheet (PDF)

Projection system

The cutting contours are projected onto the cutting surface of the ARISTOMAT. Thereby, an optimal utilisation of material and the processing of remnants becomes much easier. For the cutting or visually checking of irregularly shaped material, the projection system considerably reduces the amount of work.

  • Projection of the contour on the ARISTOMAT true to scale
  • Best possible material utilisation, especially for remnants
  • Less waste due to optimal placement of the contour
  • Available for ARISTOMAT series GL, TL and LFC

Product information sheet (PDF)

Material Transport

Our tailored winding and unwinding equipment for light to heavy material rolls is automating the continual material transport for every application. The product range also allows a precise continued cutting of overlong jobs with successive material feed cycles, necessary e.g. when cutting foils.

Unwinding system UW up to 500 kg

  • Roll weight up to 500 kg
  • Roll diameter up to 1000 mm
  • Available for ARISTOMAT series GL, TL and LFC

Unwinding system UW up to 1.5 t

  • Roll weight up to 1.5 t
  • Roll diameter up to 1000 mm
  • Available for ARISTOMAT series GL, TL and LFC

Motorized Wind and Unwinding Device

  • Roll weight up to 120 kg
  • Roll diameter up to 500 mm
  • Available for ARISTOMAT series GL, TL and LFC

UnrollBowl

  • Roll weight up to 90 kg
  • Roll diameter up to 300 mm
  • Available for ARISTOMAT series GL and TL

Motorized Winding trough

  • Roll weight up to 90 kg
  • Roll diameter up to 310 mm
  • Available for ARISTOMAT series SL and TL

RollerBlock

  • Roll weight up to 100 kg/m
  • Roll diameter up to 350 mm
  • Available for ARISTOMAT series GL, TL and LFC

Product information sheet (PDF)

Material registration

Material Position Detection

With the Material Position Detection a misalignment of the material can be determined and compensated. For this purpose, up to four material edges are scanned at several positions in X- and/or Y-direction with a contrast or reflex edge sensor. This is especially important when a contour is to be cut exactly at one certain position.

Mobile Barcode Reader

The automatic procedure can be supple-mented by a mobile Barcode Reader, which can identify the plot file by means of a barcode printed on the pattern and automatically allocates to the corresponding cutting data.

CutRecall

Know-how memory for cutting processes

The know-how data base CutRecall consistently increases the performance of the ARISTO Cutter. New work processes can be set up more quickly and the efficiency increased. With CutRecall the complex material and process specific parameter settings are saved and retrieval for a further work process takes place as fast as lighting.

  • dialog-controlled data backup after a process run
  • reducing of setup times
  • fast data retrieval by mouse-click
  • avoid input errors

Product information sheet (PDF)

Productivity

Produce automatically, reduce idle times and at the same time increase the productivity

AlternationModeWorkArea

  • Loading and unloading parallel to the production process
  • Increase productivity by reducing idle time
  • For all ARISTOMAT LFC available

Product Information Sheet (PDF)

ProductionLineCutter (PLC)

  • Remove cut material whilst further parts are being cut
  • Placing and/or removing boards
  • Circulating conveyor belt
  • Available for ARISTOMAT series GL, TL and LFC

PU Conveyor

  • The smooth surface is particularly suitable for fibrous materials such as glass and carbon fiber
  • The materials can be removed easily from the conveyor belt

Parallel-running tool heads

  • The use of multiple parallel-running tool heads increases the productivity of the ARISTO cutters considerably
  • Different solutions can be supplied according to usage
  • ARISTO offers the solution for your production

Cutter software

All common Work Software with HPGL-output can be used for creating and optimizing cut-files for the ARISTOMAT (e.g. SAi Flexi, Engview, cncCut, AutoCAD, PROCUT, Optiscout, … and many more …). All major print-software supports ARISTO as well.

ARISTO Designer – Packaging & Display Software

ARISTO Designer – Packaging & Displaysoftware

ARISTO Package & Display Designer is 2D and 3D software specially developed to improve the packaging and the POP/POS displays production. It is compatible with Adobe® Illustrator® and supports the entire workflow, from the concept design and 3D assembly to artwork arrangement and generation of plotter files.

Features

  • Smart Drafting with parametric components
  • 3D modelling with realistic 3D PDF generation
  • Support of ECMA, FEFCO and Xanita codes
  • Library of Packaging Designs
  • Library of Display Designs
  • Layout and Nesting Optimization
  • Adobe Illustrator plug-in
  • CAM

The software is available for the packaging sector as well as for the display sector or as a bundle.
For more information see www.engview.com

cncCUT for the construction of gaskets

cncCUT for the construction of gaskets

Thanks to extensive CAD functionality and intuitive user guidance, cncCUT is particularly suitable for creating data for cutting seals.

Very easily and without any prior knowledge, you can quickly create drawings yourself with the integrated CAD system IBECad or load macros and DXF drawings into the software. The drawings automatically receive technology data from cncCUT. The software suggests optimized travel and minimizes idle travel. Each setting in the program can be edited manually if required.

For material optimization, the modules Contour Nesting and Parquet Boxing are also offered. Plotter applications have special functions available:

  • response of various tools, e.g. marking pen, oscillating knife, puncher and fixed knife
  • automatic tool change
  • Supernatant, overcut
  • Sort order by tool
  • Speeds for each knife according to material and thickness

Automatic or manual adjustment of the tools according to contour
For more information see www.ibe-software.

PROCUT®

PROCUT® is a software solution for the nesting (overhead-light projection) and the cutting of patterns by means of die-less cutting technologies (knive, laser, waterjet). The system can be operated either as a stand-alone solution (at the respective cutting table) or integrated in an IT-network (as work preparation). The data for cutting is generated by the CAD-system automatically.

Features:

  • data import
  • automatic layout / nesting (leather)
  • modifications of patterns
  • bar code support

For more information see www.procam-software.com